In-Panel Insert Valet Rod
SKU: TD-323-GYM
A garment rod that's there when you need it and completely invisible when you don't — this Allied Brass in-panel insert valet rod installs flush into any 3/4" or larger closet panel, shelf edge, or cabinet side, leaving nothing visible but the ball-tip pull when retracted. Because it inserts directly into the panel rather than mounting to the wall on posts or flanges, it works in far more locations than a traditional wall-mount valet rod — anywhere a 3/4" panel exists and wall mounting isn't practical or desirable. Solid brass construction resists corrosion through years of daily use. A precision drilling guide is strongly recommended for installation — proper hole alignment is critical to smooth operation and long-term stability.
- Installs inside the panel, not on the wall: Fits into any 3/4" or larger closet panel, shelf edge, or cabinet side — putting it in locations a standard wall-mount valet rod can't reach, with nothing visible but the ball-tip pull when closed.
- 4" of hang space, zero footprint when retracted: Extends a full 4 inches for garments, then retracts to a 7-1/4" overall profile that sits flush with the panel face — nothing protruding, nothing catching clothing when not in use.
- One-finger operation: A simple pull extends the rod for instant hanging space; a push sends it back flush into the panel — smooth, effortless, and completely out of the way when you're done.
- Swappable pull knob: The ball-tip pull is removable and accepts any standard cabinet knob — match it to existing closet hardware throughout the space without compromise.
- Drilling guide strongly recommended: Precise hole placement is critical to smooth, rattle-free operation and long-term stability. A dedicated drilling guide takes the guesswork out of installation and is highly recommended for best results.
- Available in 28 finishes — Made in the USA: Solid brass construction handcrafted in Virginia for over 70 years, available across the full Allied Brass 28-finish lineup. All mounting hardware included. Backed by a Limited Lifetime Warranty.
Specification & Documentation
Product dimensions, in. (LxHxW): 6x7x6
Box dimensions, in. (LxHxW): 10x6x4
Shipping weight, lbs: 2
| Installation Instruction | Technical Specification | ||||
|
|
Specification & Documentation
| Type | Garment Rods |
|---|---|
| Brand | Allied Brass |
| SKU | TD-323-GYM |
Installation instructions are included with your purchase. For most products, wall mounting requires standard hardware and a level.
Questions? Contact our team for guidance.
Description
A garment rod that's there when you need it and completely invisible when you don't — this Allied Brass in-panel insert valet rod installs flush into any 3/4" or larger closet panel, shelf edge, or cabinet side, leaving nothing visible but the ball-tip pull when retracted. Because it inserts directly into the panel rather than mounting to the wall on posts or flanges, it works in far more locations than a traditional wall-mount valet rod — anywhere a 3/4" panel exists and wall mounting isn't practical or desirable. Solid brass construction resists corrosion through years of daily use. A precision drilling guide is strongly recommended for installation — proper hole alignment is critical to smooth operation and long-term stability.
- Installs inside the panel, not on the wall: Fits into any 3/4" or larger closet panel, shelf edge, or cabinet side — putting it in locations a standard wall-mount valet rod can't reach, with nothing visible but the ball-tip pull when closed.
- 4" of hang space, zero footprint when retracted: Extends a full 4 inches for garments, then retracts to a 7-1/4" overall profile that sits flush with the panel face — nothing protruding, nothing catching clothing when not in use.
- One-finger operation: A simple pull extends the rod for instant hanging space; a push sends it back flush into the panel — smooth, effortless, and completely out of the way when you're done.
- Swappable pull knob: The ball-tip pull is removable and accepts any standard cabinet knob — match it to existing closet hardware throughout the space without compromise.
- Drilling guide strongly recommended: Precise hole placement is critical to smooth, rattle-free operation and long-term stability. A dedicated drilling guide takes the guesswork out of installation and is highly recommended for best results.
- Available in 28 finishes — Made in the USA: Solid brass construction handcrafted in Virginia for over 70 years, available across the full Allied Brass 28-finish lineup. All mounting hardware included. Backed by a Limited Lifetime Warranty.
Specification & Documentation
Product dimensions, in. (LxHxW): 6x7x6
Box dimensions, in. (LxHxW): 10x6x4
Shipping weight, lbs: 2
| Installation Instruction | Technical Specification | ||||
|
|
Specifications
Specification & Documentation
| Type | Garment Rods |
|---|---|
| Brand | Allied Brass |
| SKU | TD-323-GYM |
Installation
Installation instructions are included with your purchase. For most products, wall mounting requires standard hardware and a level.
Questions? Contact our team for guidance.
Complete Your Bathroom
Add more items to qualify for the 10% bundle discount (minimum $1.00)